Nanotechnology Increases the Profitability of Poultry Farming (2019/03/10)
Industrialization of poultry farming has led to both more profitability and greater attention being paid to maintaining food health. Purposefully control of pathogens is one of the most important issues that need to be addressed in the poultry industry in order to increase production efficiency...News Visited Count : (58)
How does Nanotechnology Prevent Building Collapse During a Fire? (2019/01/27)
High-rise fire, especially in metropolises such as Tehran can be catastrophic. Installation of electrical and mechanical services in buildings, the use of burning materials and development of the electricity supply system, energy distribution networks has increased the likelihood of fire in...News Visited Count : (80)
Towels are no longer a place for bacteria (2018/12/16)
Wet and damp environments are a good place for microbes and bacteria to grow. The towels also have a lot of bacteria because they remain wet after the use. These towels can cause a variety of skin sensitivities and fungal diseases, especially in sensitive parts of the body, during daily...News Visited Count : (95)
Nano Technology Makes Aluminum More Applicable!
Nanostructured coatings provide new properties with aluminum
As a provider of all kinds of plating services and nanostructured coatings, Isatis Nano Plating Knowledge-based Company has succeeded in decreasing the cost of production of nanostructured oxide coatings considerably while localizing the knowledge of its production.
Employing aluminum with oxide nanostructured coatings has abundant advantages in various industries including the low weight, high strength, background hardness and high surface hardness, high corrosion resistance, hygiene and sanitation and biocompatibility, high stability and resistance to ultraviolet radiation, proper optical properties and high absorption and radiation coefficient, neutrality of coating and lack of propensity towards reactivity, appropriate dielectric insulation properties and high thermal conductivity, suitable chemical stability, high adhesion to the coating, heat resistance, high abrasion resistance, and proper cost of production.
The company has also the ability to precisely control the production of these types of coatings using advanced equipment, including switching rectifiers to produce them with the favorable engineering properties having the desired application.
NanoPOT water divider collector, nanoPOT bushing and nipple and converters, Alpha 9 heat sinks, and nanoPOT Aluminum gears are among the appropriative manufactured products with Aluminum alloys offered by Isatis Nano Plating Company.
The company also provides various services in the field of hard and normal anodizing and chemical polishing of aluminum.
Does this product have any of the necessary approvals and permissions?
Isatis Nano Plating Company, having obtained a certificate for the technology of creating oxide nanostructured coatings in the collector and bushing and nipple, and nanostructured alumina anodized on an aluminum alloy used in heat sink, has been producing massive nanoPOT collectors for about three years, and in the field of nipple and heat sink, it is also on the brink of producing and commercializing these products.
Isatis Nano Plating Company has been able to obtain a patent certificate for the production of a collector with oxide nanostructured coating in addition to obtaining a nanoscale certificate and obtaining licenses from the Ministry of Industry, Mine and Trade, Yazd Science and Technology Park, and the Institute of Technology Development Services up to the Iranian market.
Currently, the company's sales in the group of nanoPOT collectors are about 10,000 branches a month, and with an increase in production capacity of Isatis Nano Plating Company for the next two months, the production will reach 30,000 branches per month.
So far, 15 people have been directly employed and 30 have been indirectly involved in the production and sale of nanoPOT collectors.
At present, companies such as Yazd Pipe, Poya Pipe, Yazd Polymer and massive equipment distributors in Yazd, Kish, Isfahan, Tehran, Mazandaran, Shahrekord and ... use these collectors.
Learn more about products of Isatis Nano Plating Co.
The collector is something which collects and is mainly used in buildings' installation as a divider. NanoPOT collectors can be used for the cooling and warming of a closed water circuit or the consuming water as well as for high-pressure gas transmissions. Additionally, large-scaled nanoPOT collectors can be used in the powerhouse and corrosive environments like marine and oil and gas environments.
Collectors are usually made of black steel, galvanized steel or brass for applications of closed-circuit cooling and heating water flow or consuming water, and sometimes for gas flow. Obviously, the flow of water into black steel will cause corrosion and short service time, and the brass collectors that usually need plating are more expensive and heavier in terms of weight. Therefore, nanoPOT collectors can be used to overcome these defects.
Isatis Nano Plating Company has been able to offer a wide range of sizes and branches of metal collectors considering the market needs and the weaknesses and defects. The company also purposes to produce and deliver fully customized collectors in accordance with the required plan according to the needs of the projects.
The brass has been used to make a metal bushing in pp (polypropylene) pipes, which is usually used for cold and hot water supply and has been high in weight and price. Based on experiments which are conducted, Isatis Nano Plating Company intends to use coated aluminum alloy instead of the brass to achieve more appropriate cost and corrosion and wear resistance.
NanoPOT nipple and converter
The weakness of brass brain and converters, just like brass collector and coating, is the heavy weights and high prices for this alloy, which can be reduced by converting them into coated aluminum, while having increased efficiency.
Basically, brass alloys with chromium coating on its surface are currently used to male water divider collectors and bushing.
Brass is an alloy of copper and zinc, which usually contains tin and arsenic. Arsenic is a very toxic element, especially when it reaches into drinking water. Also, the chromium-plated coating on these components has many environmental problems. As highlighted above, the high prices of brass along with its high weight are also the major problems of the products made with this alloy.
The production of water divider collectors and bushing of polymeric connections which has been currently using brass alloys has major defects of the low abrasion resistance, high density, and low strength to weight ratio that can be cured by choosing the right aluminum alloy and making oxide nanostructured coatings on the surface of this metal.
Benefits of NanoPOT collector, bushing, nipple, and converters rather than brass products
Hardness: The hardness of nanoPOT collectors is about 800 to 1,000 Vickers, equivalent to 65 to 70 Rockwell C, while the hardness of brass does not exceed 200 Vickers in the best condition.
Resistance to abrasion: Coating of nanoPOT collectors has high-adhesivity and high hardness which strongly strengthen the surface of components against abrasion. Also, since the nature of the coating is ceramic, it exhibits a lower coefficient of friction than metal couplings in the abrasion couplings with the metal opposite side, which itself leads to a further increase in abrasion resistance.
Resistance to corrosion: Aluminum is inherently corrosion-resistant metal. With alumina coating, its corrosion resistance is among the best in engineering alloys. Compared to brass, in addition to the fact that types of corrosion, such as selective corrosion are not distressing for aluminum, the uniform corrosion resistance of these collectors is far higher thanks to the thick oxide coating of nanoPOT collectors.
As demonstrated in the result of the Tafel polarization test for brass, plain aluminum and nanoPOT aluminum collections carried out by the Razi Metallurgical Laboratory, the corrosion flow for the nanoPOT collectors has the lowest value, which indicates a higher corrosion resistance of the nanoPOT collectors than brass and aluminum collectors. It is worth noting that the differences are significant in this regard, as the resistance of the nanoPOT collectors has been approximately 10 times greater than the brass collectors and more than 100 times the aluminum collectors.
Chemical neutrality: Brass is a copper alloy. The copper resistant to corrosion in the pure state, not as an alloy. It is also readily corroded in acidic environments. In contrast, nanoPOT collectors have a much higher resistance to chemical substances and much less willingness of reactivity, because the surface layers of aluminum are bound to oxygen and the metal is not in the active state.
Biocompatibility: Nanostructured oxide coatings of nanoPOT collectors are considered to be very safe for biocompatibility. Also, these types of coatings can be recycled without the slightest danger to the environment.
Facilitation in cleaning, resistance to salt sedimentation and corrosion products: Because oxide coatings of nanoPOT collectors are chemically neutral and resistant to corrosion, there is low tendency to react to the formation of sediment and corrosion products. As well, substances in the salt form in water require an active surface to make a deposit, which does not provide them with coatings created on nanoPOT collectors.
Alpha 9 aluminum heat sink
The heat sink is an electric insulator and thermal conductor; therefore, it can be used jointly for chips used in a base attached to the heat dissipation part. In this case, there has been a strongly decreased possibility of electric shock, connection to other components, connection to the board, ignition and fire, and so on. This heat sink has also noticeably increased radiation coefficient causing increased heat transfer.
The surface of the heat sink is hard and highly resistant to corrosion, although it's not an important advantage for cool air radiators, but is a key priority for cool water (other fluids) radiators.
Aluminum heat sinks are now being manufactured inside the country by the extrusion method; however, Isatis Nano Plating Company plans to provide these heat sinks for exclusive ordering and supply to the market after coating with oxide nanostructures.
As a provider of all types of plating services and nanostructured coatings, Isatis Nano Plating Knowledge-based Company has succeeded in significantly reducing the cost of producing and creating these coatings along with their localization.
You can visit the page of Isatis Nano Plating Company Nanotechnology Initiative Council to learn more about its products.